Hello. In the Failed Requests section, it has no entry for timeouts.
snmpget -v 1 -c demopublic test.net-snmp.org SNMPv2-MIB::sysUpTime.0 Timeout: No Response from test.net-snmp.org.
This is my response for the first example. I'm a new user to SNMP and have spent four hours with various SNMP agents and browsers with no results, just errors and timeouts.
Designatevoid 20:46, 20 October 2007 (PDT)
If this doesn't work you may be behind a firewall that blocks the responses from the internet.
If you are within a network with a DHCP router, start a command prompt and issue an ipconfig dos command
it should respond something like this
Ethernet adapter Local Area Connection 1:
Connection-specific DNS Suffix . : jollyroger.internal
IP Address. . . . . . . . . . . . : 134.171.264.60
Subnet Mask . . . . . . . . . . . : 255.255.248.0
Default Gateway . . . . . . . . . : 134.171.264.1
Try snmpget -v 1 -c public 134.171.264.1 SNMPv2-MIB::sysUpTime.0
How could it work?
Do you really suppose every firewall has snmp service?
I want to know how to use this commands on my localhost...