Tut:Extending snmpd using shell scripts

From Net-SNMP Wiki
Revision as of 19:05, 13 April 2011 by Rstory (Talk | contribs) (Documentation)

Jump to: navigation, search

This tutorial is intended as a brief introduction to extending the snmpd agent using shell scripts.

Documentation

Shell scripts are configure in snmpd.conf. The man page for snmpd.conf has a section on EXTENDING AGENT FUNCTIONALITY which covers the exec, extend and pass methods.

There is also a FAQ on the differences between the various methods.

External examples

This article is mostly a place holder at the moment. Until it gets flushed out, here are some external examples we've found on the Internet: